点击图片查看原图
TA-MC253SEHigh performance proportional actuators with fail-safe extending and automatic stroke adaptation which provide accurate modulating, 3-point or on/off control when used together with combined control and balancing valves – both with or without integrated Δp controller – as well as stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.产品概述 产品规格照片
产品信息High performance proportional actuator with fail-safe extending function – 2500 N
High performance proportional actuators with fail-safe extending and automatic stroke adaptation which provide accurate modulating, 3-point or on/off control when used together with combined control and balancing valves – both with or without integrated Δp controller – as well as stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.
Key featuresEasy commissioning
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off helps to reduce commissioning time and protect the valve and actuator from overloading.
Easy troubleshootingProtected hand drive for a safe manual operation enables easy troubleshooting.
Ease of service
The actuator housing cover is easy to remove. Parameters can easily be changed on site - without using a Laptop.
Technical description
Applications:
For modulating or 3-point control.
Fail-safe function:
Actuator's stem extended on power failure.
Supply voltage:
TA-MC253SE/24: 24V AC ±10%
TA-MC253SE/230: 230V AC +6%, -10%
TA-MC253SE/115: 115V AC +6%, -10%
Frequency 50-60 Hz ±5%
Power consumption:
TA-MC253SE/24: 50 VA
TA-MC253SE/230: 80 VA
TA-MC253SE/115: 80 VA
Input signal:0(2)-10 VDC, Ri ~77 kΩ 0(4)-20 mA, Ri ~510 Ω.Signal direction and starting point adjustable by micro switches. 3-point control.
Output signal:0-10 VDC, max. 8 mA, min. 1,2 kΩ.
Hysteresis:0,05 V, 0,15 V, 0,3 V or 0,5 V
Resolution:Electric: 0,04 VDC Mechanical: 0,04 mm
Control speed:5 or 2,5 s/mm
Fail-safe speed:0,1 s/mm
Adjusting force:2500 N
Operation mode:S3-50% ED c/h 1200 EN 60034-1End position switch-off:Load-dependent
Automatic detection of the valve lift.
Temperature:Max. ambient temperature: 60°C Min. ambient temperature: 0°C
Ingress protection:IP 54
Protection class:(according to EN 60730)24 V: III 230 V: II 115 V: II
Stroke:Max. 40 mmElectrical connection:Actuator with screwed terminals.
Connection to valve:Simple attachment to the valve by means of M8 screws. For some valve types an adapter may be needed, please see accessories section.
Weight:12,5 kg
Colour:Black body and red cover.
Marking:TA, Article No, product name and technical specification.
Actuator variants:- Position switch unit: ?2 switches (WE1/WE2), potential free, infinitely adjustable. ?Rated load: 8 A / 250 VAC, 8 A / 30 VDC. ?Switching voltage: max. 400 VAC, max. 125 VDC.- Ingress protection: IP 65- Output signal: X=0(4)...20 mA- Adapter with coupling for external product